Showing posts with label GPRS. Show all posts
Showing posts with label GPRS. Show all posts

FACTS ABOUT CELCOM MOBILE BROADBAND

2


1. Previously Celcom offers two types of internet connections which are based on Circuit Switch (CS) data and the recent one is based on Packet Switch (PS) data. Since last year, the CS connection was abandon and there is no more available support for the system. The current PS connection applied through 4 different networks i.e: GPRS, EDGE, UMTS/WCDMA and HSDPA.

2. The speed of your internet connection is based on location, what type of signal available and the device/modem you are using.

3. Basicly, there are 5 types of Celcom Mobile Broadband offerings:
a. D68 coupled with voice plan (CEP or minutes plan) -up to 384Kbps
b. D98 coupled with voice plan (CEP or minutes plan) -up to 3.6Mbps
c. Stand Alone D68 -up to 384Kbps
d. Stand Alone D98 -up to 3.6Mbps
e. Daily Unlimited RM6 per day -up to 3.6Mbps

4. Celcom offer widest UMTS/WCDMA and HSDPA coverage in the country.

5. Dont expect to get full 384Kbps or 3.6Mbps. It`s almost impossible. That is the maximum speed of the system under maximum conditions. Usually you will get around 200Kbps-300Kbps for D68 package and around 800Kbps-3Mbps for D98 package. Determine what type of signal is available in your area before deciding to subscribe.

6.Your internet speed will be reduced if there are a lot of Celcom subscriber attached to a certain cell tower. If there is a lot of voice call transmitted to the tower which your connection is hooked, it will also decrease your connection speed due to the tower will prioritize voice call over data transmission.

7.Celcom impose 5GB limitation as a fair usage policy for each subcriber. Once your download exceed 5GB, for D68 subscriber, your speed will be throttled from 384Kbps to 64Kbps. For D98 subscriber, your speed will be throttled from 3.6Mbps to 128Kbps. Your connection speed once throttled will be reseted on your next billing cycle.

8. The connection using mobile networks is much inferior compared to fixed line networks in term of stability and speed. So dont expect you Mobile broadband to replace your Streamyx connection. Mobile Broadband intended for those who are always want easy internet connections while on the move. For heavy downloads and online games, stick to fixed line broadband.

9. Celcom use dynamic IP shared by all subscribers. Dynamic IP is considered as unsecured connections, thus it may restrict you from accessing certain websites which require personal IP such as rapidshare and MIRC. However there is no problem if you want to use Celcom Broadband to access Internet Banking website and perform online transactions.

10. You can share your Celcom broadband internet connections with other computers using dedicated routers.

CHINA MOBILE SETTING (I MOBILE, NOKLA, BLUEBERRY, CSL, TV MOBILE ETC)

5


Nowadays made in china phone or more popularly known as China Mobile in Malaysia, is quite a common sight on our local Communication shop. These China Mobiles and its clone (such as I MOBILE, CSL, BLUEBERRY and NOKLA to name a few) got some disadvantages. The most common disadvantages is that local telecomunications company (Celcom, Digi, Maxis and U Mobile) MOST PROBABLY do not provide OTA settings (a.k.a. Over The Air settings). Most unlucky customers will end up scratching their head due to the fact that not all telecommunications company provide technical support to configure their phone. So for my friends out there who is not a very tech-savy minded, I provide below a general outline on how to configure your beloved phone. The settings below is for CELCOM SUBSCRIBER ONLY. For other TELCOs, leave your comments and I will post the details in this blog.TQ



MANUAL CONFIGURATION OF GPRS

From Main Menu> Services> Data Account> GPRS

  • If Celcom GPRS does not exist, go to Account # (eg: Account 1),
    Press
    Edit
  • Account Name : celcom GPRS
  • APN : wap.celcom.net.my (Postpaid), celcom (Prepaid), celcom3g(3G SIMcard)
  • Authentication Type : Normal
  • Press Done > "SAVE?" > Select YES
  • Press Back (2X)

Select WAP > Select Settings > Select Edit Profile

  • If Celcom WAP does not exist, go to Profile # (eg: Profile 1), Press OK
  • Select Edit Profile
  • Rename : Celcom GPRS
  • Homepage : http://wap.celcom.com.my
  • Data Account : GPRS : Celcom GPRS
  • Connection : HTTP
  • Proxy Address : 010.128.001.242
  • Proxy Port : 8080
  • Press Done > "SAVE" > Select YES
  • Select Activate Profile
  • "Active Profile" > Press YES


• GPRS configuration completed



MANUAL CONFIGURATION OF MMS


From
Main Menu > Setting > Connections > Data Connections

  • Select Edit a Connection
  • If Celcom MMS does not exist, Press Cancel > Select Add a new connection
  • Profile Name : Celcom MMS
  • Proxy 1 : 010.128.001.242
  • Port 1 : 9201 / 8080
  • GPRS APN : mms.celcom.net.my (postpaid), celcom (prepaid), celcom3g (3G sim)
  • Press Back

Main Menu > Messages > MMS > MMS Settings > Server Profile

  • If Celcom MMS does not exist, go to Profile# (eg: Profile1) > Press OK
  • Select Edit Profile
  • Rename : Celcom MMS
  • Homepage : http://mms.celcom.net.my
  • Data Account : Celcom MMS
  • Connection : HTTP
  • Proxy Address : 010.128.001.242
  • Proxy Port : 8080
  • Press Done
  • "Save?"> Press Yes
  • Go to Activate Profile
  • "Activate Profile?" > Press Yes
  • Select Celcom MMS > Press OK
  • MMS configuration completed


MOTOROLA A1200 WAP AND MMS SETTING

3


Setting up MMS and WAP on Motorola A1200 ( carrier: Celcom, Maxis, Digi)

1) go to setup

2) then select data network

create 2 profiles,

A)WAP PROFILE

First profile is for WAP, key in this info:
Profile name: Celcom Wap @ Maxis Wap @ DiGi Wap
apn: (celcom= Celcom3g, celcom or wap.celcom.net.my), (Maxis= net), (DiGi= digiwap)
username: (Celcom= none), (Maxis= maxis), (DiGi= wap)
password: (Celcom= none), (Maxis= wap), (DiGi=wap)
IP: (Celcom= 010.128.001.242), (Maxis= 202.75.133.49), (DiGi= 203.92.128.160)
Port: (Celcom=8080), (Maxis=80), (DiGi=80)

leave everything else blank.

Then launch your browser, select the menu button, go to setup and select profiles, then choose the name that we enter previously and then select edit and fill it out this way:

profile name: Celcom WAP @ Maxis Wap @ DiGi Wap

Homepage: (Celcom= http://3g.celcom.com.my), (Maxis= http://wap.maxis.com.my), (DiGi= http://wap.digi.com.my)

Network link: Celcom Wap @ Maxis Wap @ DiGi Wap

Your WAP browser is now successfully configured!!



Now for the second Profile
B)MMS PROFILE

Profile name: Celcom MMS @ Maxis MMS @ DiGi MMS
apn: (celcom= celcom3g, celcom or mms.celcom.net.my), (Maxis= net), (DiGi= digimms)
username: (Celcom= none), (Maxis= maxis), (DiGi= mms)
password: (Celcom= none), (Maxis= wap), (DiGi= mms)
IP: (Celcom= 010.128.001.242), (Maxis= 202.75.133.49), (DiGi= 203.92.128.160)
Port: (Celcom=8080), (Maxis=80), (DiGi=80)

leave everything else blank.

now to complete mms settings go to messages>menu>service setup>Multimedia messages

Default profile should be Celcom MMS @ Maxis MMS @ DiGi MMS
choose edit

MMSC: (Celcom: http://mms.celcom.net.my), (Maxis= http://172.16.74.100:10021/mmsc), (DiGi= http://mms.digi.com.my/servlets/mms)

Network Profile:
Celcom MMS @ Maxis MMS @ DiGi MMS (the one you saved from data network)

now you have your MMS service configured, good luck!!!!!!!!!!!!!

About Me

My photo
I blogged from an iOS device.. :) no preferred subjects. A lil' bit of technology, a lil' bit of amateur photography.. But mostly it all centered around my daily life.

Search This Blog

Visitors

Followers